The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Doing brakes soon S60 2007

Replacing rotors and pads soon with OEM parts from Tasca. Car has 121k, for an extra $120 per axle I can replace the calipers with OEM from Tasca as well. Whilst I don't want to be wasteful I am apt to look at this from the perspective of 1. I dont have to worry about cleaning the slide pins, 2. don't have to retreat the piston.

Am I correct in assuming new slide pins would accompany the new caliper? If so this is a no brainer, I've had calipers fail as short as 140k, would hate to do the job and have the piston sieze this summer.

While I am at it do I ante in the extra cash and get new brake lines, perhaps braided? Changing the calipers I know I am on the hook for power flushing the fluid...will need to get a power bleeder.

Just wanted to get some 2 cents from others.

Thanks,
Steve






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.