The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Replace blower motor V70-XC70

posted by  KlausC on  Mon Oct 27 12:56 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

Code reader will not normally show ECC codes. I suspect that the resistor is gone. You also will need to check the fuse, just in case.

Replacing the blower is a good move as it is quite old and requires the same access as the resistor.

Along with a T25, you will need a pick to get the glovebox hinges uncoupled. And a 3/8 ratchet with a socket to get the knee brace off - 13 or 15mm.

Do not over tighten the glove box screws when putting it back on!

You do not need to disconnect the battery. The ECC stores codes in its own memory and cannot be erased by lack of electricity - don't ask me how they do that!
--
My back feels better when I sit in a Volvo seat






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.