The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

One injector...850 93 850

It's been a while since I posted/updated.

Had the injectors cleaned, all performed fine (according to shop). Got new o-rings and spacers. installed them all.

Car ran better, BUT still a little rough/hesitation. So I tested the vacuum areas with spray water, and at the injector ports. No change.

Disconnected the #1 injector wire, and there was no change. #'s 2-5 all had a noticeable change. Like, the car wants to stall and then corrects itself.

Does that seem to point to a bad connector or something computer related? I'm going to look around on the board for some suggestions (including some I've already received).

Thanks again

btw, I know it's not an injector itself, because I did not install them into the same port as before (I did not # them before I had them cleaned).
--
1985 245. 246K Gone..but not forgotten.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.