The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ignition switch wasn't the problem 850

Well, the ignition switch arrived Saturday and I had it in in less than 30 minutes... the black part was separating from the silver part on the old switch and the spring inside was worn. Key has much more tension starting the car now, but the temp gauge still drops out while driving. I cleaned the contacts in front of the battery with all the little black wires on it.....not the problem either. So I'm thinking the harness to the VDO is loose. Good project for next weekend. I have an old one to swap out to check. If this doesn't work, I'm out of DIY checks unless someone has another idea... the strange thing is it always works after sitting for about 8 hours....it works for about 20 minutes or so and then just drops to the bottom of the display like there is no power. it won't work for the rest of the day, and after sitting for about 8 hours it works again, sometimes for a couple days....strange.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.