The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Bolt Pattern & Offset: S40-V40 2000

posted by  someone claiming to be Arno Griffioen on  Thu Sep 23 01:58 CST 1999 [RELATED]

Bolt pattern is 'japanese': 4 x 114.3. Shop for wheels which fit Toyota's and such.

Default offset of steel Volvo wheels is ET44 (don't know about alloys), but if you want to go wider than 205 tires (the max. on Volvo wheels) then most aftermarket wheels have an offset which ranges from ET35 to 42 with ET37 being most common for 17"/8J wheels.

My 215/40R17 setup with a wheel with ET37 has enough clearance on the inside so it doesn't rub on turning the wheel to full lock and it doesn't rub on the rear fender lip either (not even when fully loaded and hitting the bump-stops)

Bye, Arno.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.