The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Tranny Solenoids 850 1996

i have replaced the solenoids in my tranny roughly 17~20K miles ago. bolt cleaning and prep is the KEY to this job. and this job is my least favorite to-date. i have done all the normal tune-ups and brakes, control arms, steering ends, shocks and springs, radiators, waterpumps, PNP switch, starters, window regulators, and timing belts... but the tranny solenoids was really not great. partially because i have no lift, but i did use car ramps and jacks, etc...

the percussion wrench is a great suggestion and some sort of PB-blatster/WD40 is important. the bolts are shallow and TIGHT. also, cleaning off the old and replacing the new gasket can be a real pain in the a$$ too. and the whole time tranny fluid is slowly dripping out while you work. it aint wonderful.

BUT, it is still running and shifting better than it was,. now, it isnt buttery and Smooooth like a new one, but it IS improved.


good luck!
--
-woodsy; 280k 1995 850 wagon;






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.