The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Coolant leak and codes V50

I think 21 psi is correct.

I looked at FCP for OEM
https://www.fcpeuro.com/products/volvo-engine-coolant-recovery-tank-cap-30680002

I looked at IPD
http://www.ipdusa.com/products/7660/114349-expansion-tank-cap-p1-p3

Now the question -- is the cap in good working order?

The cap wiggles a bit when I push on side to side. It is suspect. The one on the S60 had male threads on the cap, it screws into the expansion tank and I can make it very snug.

The V50 cap is a female end and screws down onto the expansion tank neck. It has a stop point, almost like it is built into the cap. It just stops. You can't feel that there is not any torque being applied as it screws onto the expansion tank. It is the oddest thing I've ever seen but then maybe that is how it is to be?

Pulling the bottom engin cover to have a look below.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.