The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Unable to Reset Diagnostic Codes 850 1993

posted by  B.B. on  Wed Apr 26 22:30 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 6 13:15 CST 2014
[RELATED]

You might have a toasted CPU.

You can try this at your own risk:
Try removing the Positive terminal for ten minutes then short that cable end to
to the Neg cable and or ground for a minute to insure that the microprocessors
are discharged. You might get lucky

WARNING Don't take a CPU connector off with the battery connected!

If above doesn't work try disconnecting the battery and reseat the CPU
connectors. Use a light spray of silicone on the pins when off.

The OBD is run directly from the CPU's. I had to reseat the ABS CPU connector
to resolve an OBD failure. The connecter went on tough until a little silicone
spray solved that issue.

Good luck, Bill






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.