The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Won't engage into drive easily after engine mount replacements... S70 1998

Well, what I mean by Slamming is if you go back into N and then back into D without going into 3 and pull it a little harder it will engage.

So tonight I did the following:
1. Placed the car in N and was able to start the car,
2. with the car off, but the key in the run position, I was able to see the reverse lights light in both directions.

Then I started the car and here is where I currently am.

While placing the car in D, if I go slightly past D and into 3, without lighting up the up arrow, and then back into D the car works fine, so I'm thinking I've moved the PNP switch a tad.

I will have to take a look at it this weekend, but for now the car is drive able.

I'll post back here once I'm able to look at it.

Thanks for all the help thus far.

Regards,

Matt






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.