The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

2007 heater fan and resistor/control module XC90 2007

posted by  HHSIII on  Wed Nov 22 00:16 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 16 20:45 CST 2014
[RELATED]

Thanks for the additional comment. We are resigned to trying to snap off the lug. It makes sense that if you could get in there to cut or something like that you should/would be able to get to the bolt. Looking at replacements on RockAuto and other sites it does appear the third lug is not very far from the one you snap off so I can see that you should be able to get a tight fit and good seal with only three. In fact I believe several vehicles I have worked the heater motor on in the past only had three spaced about 120 degrees apart.
Current plan is to snap off lug and replace both blower and the resistor.
Thanks again for the dialog and discussion.
Happy Motoring.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.