The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

PCV banjo bolts question... V70-XC70 2007

Ok, I'm about to put my car back together and I just discovered that the banjo bolts that are part of the PCV system are different both in nut head size and in the physical end of the bolts.

One banjo bolt has a 17mm head and some sort of jiggle thingy inside of it.

The other banjo bolt has a 19mm head and does not have anything inside of it.

One goes to the intake manifold, the other goes to the head on the driver side of the car.

I thought they were both the same until tonight when I started getting things ready for tomorrow's rebuild.

Any help on this is and will be greatly appreciated as I don't want to put the wrong banjo bolt in the wrong spot. My current hunch is the 17mm goes in the head, and the 19mm goes in the intake manifold, but I need to know for sure.

Thanks in advance,

Matt
--
1989 - 245, 1990 - 245, 1991 - 245, and 1993 - 245






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.