The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No starter 850 1996

OK Dennis On Richmond, been through there.
I want to clarify how to diagnose the NO STARTER problem using the
service socket a wire jumper and a voltmeter.

The service socket "17/1" will help you identify the problem as follows:



The drawing shows where the service socket is in the starter circuit
It is after the alarm relay "2/28" contacts.

You can test the Tranny Range selector and starter solenoid by
hooking the service socket to +12VDC (With the key in RUN position)
The car should start.

You can turn the key to Start position and measure +12VDC at the service socket
If +12VDC The Ignition switch and 2/28 alarm relay contacts are OK

Do it and report back, these two little tests should not take too long.

Bill






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.