The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacement procedure for rear strut/shock V70-XC70 2012

Well my question, in hindsight turned out to be a pretty stupid one. This job is a piece of cake. Simply required my jacking up the side of the car ahead of the rear wheel after having loosened the lug nuts and removing the rear wheel. I then lowered the A-frame onto a jack stand to take the tension off and collapse the shock a bit. Three bolts to remove; the two 10 mm bolts on that hold the top bracket into place are easily accessed in the wheel well after removing the rear wheel and the bottom thru-bolt that fastens the lower end of the shock to the A-frame is removed with an 18mm socket. No need to support the car on anything but the jack as you never need to go under the car with anything but your arm to remove the lower bolt. Both rear shocks were done in under 30 minutes, including putting the tools away.
--
John Brabant 2012 XC70 T6 Platinum






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.