The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Hella 500 driving lights help V70-XC70

Wire one side of the switch to +12VDC
Wire the other side of the switch to the relay coil
Wire the remaining relay coil to ground

When you flip the switch, the relay points will close.
check the unwired relay points for continuity
switch on = 0.0 Ohms
switch off = infinity -

Wire one side of the relay switched points to +12VDC
This will be a heavy wire maybe #10-12 with an appropriate fuse to the battery,
and put the fuse close to the battery.
Hella will tell you how many amps for the lights, you can use an in-line fuse holder.
The remaining switched points wire from the relay to the lights- (same heavy wire.)
The remaining lights wire to ground. (same heavy wire)
Use the common ground near your battery,
You can find the ground points in the wiring diagram for your car.
Use a factory ground point. Not everything is suitable.
Make sure to secure all wires with tie wraps

Good luck, Bill






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.