The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

2002 PVC Replacent-Banjo Bolt question S60

I've watched many YT videos on this procedure. All seem to gloss over the part about this 17MM bolt re-install! It seems to require at least 4 hands to do this! I have the intake loosely installed and I am trying to get this bolt lined up and it is defeating me.

I did replace the hose connecting the fitting that the bolt goes through, and it seems to put the alignment slightly off. It's very hard to determine exactly where that fitting should be with the intake off..


I've removed the radiator and even the core support but there is still little room to get hands on that fitting, turn it to line up, and start it in. Do not want to take a change of damaging the threads.

Any thoughts about this? I haven't tried to pull the intake back off and do this because it seems the hose might not have enough "give" with it being connected to the PVC.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.