The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

FEI Computer - can a simple

There can be quite a bit of oil in the intake from your
turbo. When you take off the hose that goes over the
engine you will see it all along the edges. It can collect
in the intercooler which has a hole in the bottom where the
oil blows out. If you don't have blue smoke out the back
of the car I would not be concerned.

As far as the fuel injection ecu, I guess there must be a
fault code that indicates a problem. I'd have the fault
codes reset and see if it re-appears before considering
replacement (as long as you are not seeing any associated
problems).

The O2 sensors problems can be triggered by wiring problem
(I believe). Might be valid to check the wiring connections
and clean them up, first. The Bay 13 site (http://volvospeed.com/Repair/o2sensor1.htm) also says replace
only if you get the codes more then once after resetting.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.