The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Error codes 232 and 435 850 1995

Larry,
Well, it seems like alot happened all at once. The flashing arrow is on indicating a transmission fault code was stored as you found out with A1 2-3-2.
The check engine lamp came on because a fault code was stored indicating your emissions are not to spec as you found out with A2 4-3-5. Is your speedometer
working now? If not, any number of sensors beign sent or received form the
TCM module could be at fault. The TCM uses the RPM sensor to determine
vehicle speed. If the TCM registers an excessive deviation in the vehicle
speed signal from the combined instrument compared to the TCM calculated speed,
then 2-3-2 is set. As far as the oxygen sensor goes, replace it. I don't have a clue what happened about the lamps failing then coming back on...






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.