The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

98 S70 Cupholder S70 1998

posted by  someone claiming to be Dan H. on  Tue Jan 15 14:23 CST 2002 [RELATED]

If all that's wrong is the little arm that pops down to support the cup from below is broken (at the hinge pin) there is a fix for that. I saw the tip here and used it myself. Involves drilling out the molded hinge pin in the arm and replacing it with a nylon bolt with the head cut off cut to just the length of the old hinge pin and epoxied in place, then just snapping the arm back into place in the holder. The repair held up for me for about 6 months, now I need to adjust the bolt. But if the plastic "hoop" part is cracked, I can't help.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.