The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

RHD strutbrace 850 1995

Bought the strut brace from Volvo and fitted it last night. The brace is very close and touches the brake fluid reservoir, I've added some foam to prevent rubbing, is this normal or do I need to file the brace's strut holes to increase it slightly. One thing it's got lots of bend and would be interesting to calculate the difference in buckling strength between the RHD and LHD one. I also had to move one of the ABS wiring connectors as the bracket had to be sawn off to fit on top of the brace's mounting. Finally anybody thought how much it changes the camber when hot? (Aluminium has a high temp coef. and the engine bay gets very hot)

Performance wise , it sounds like the dash rattles are less and I did a slow speed (60km/h) 90 degree and the normal “wallowy” feel wasn’t there, Also did a high speed interchange turn at 160 km/h and turn in felt better.







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.