The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

antenna mast 850 1995

I recently reversed out the 850 and the garage door was still down far enough to catch the antenna; it bent the tubes and then started grinding when the motor was activated. I gently bent them back and lubed them up and it was OK; I had to force the movement up & down a couple of times to get the antenna to expand/retract properly, but in the end it worked.

Check to see if your antenna is bent by having the radio on then rotating the antenna in it's socket by hand and seeing if it moves out of axis when you rotate it. If it does, then this may be your problem and it will cause the mechanism to grind. You can bend it back, but beware as this metal is thin and delicate! Heaps of WD40/penetrating oil is useful here.

Beats replacing the antenna unit...
--
Michael in Sydney -> http://au.geocities.com/ozbrick850







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.