The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

850 Boost Problems 850

posted by  someone claiming to be Jeremy M. Kelley on  Fri Jun 7 01:12 CST 2002 [RELATED]

I have a 1997 850 T5 and recently ran my boost at ~18psi which since I had a bone stock 850 caused my rods to bend, me to fry my piston rings, etc. Well I just got the car out of the shop and they told me they set my wastegate to stock specs (9.6psi) however when I floor it I hit about 14.4-15psi which is way above stock. Anywayz I removed my heat shield planning on lengthening my actuator rod a couple of turns to lower the boost when I noticed I no longer have a locking nut, and I cannot turn my actuator rod shorter or longer. Any ideas are appreciated. Also I have a Dawes Devices Boost Controller (race version) that should be here any time, I was wondering if I install it so it bypass ECU control of my car will that fix the problem of me running to high of boost, or will it make it worse to use a MBC when I might have a potential problem with my Wastegate Actuator.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.