The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

P0455 OBDII CODE-fuel vapor leak, where are the obvious places to look, hoses, fittings, etc 850

OK i pulled this code from my ECU P0455,

here is a definition of it

: P0455 - EVAP Control : The PCM monitors the : * After-market EVAP : Check for audible :
: System Leak Detected : complete EVAP control : hardware (such as : vacuum noise or :
: (No Purge Flow or : system for no purge : fuel filler cap) : significant fuel odor :
: Large Leak) : flow, the presence of : non-conforming to : in the engine :
: : a large fuel vapor : required : compartment or near :
: : leak or multiple small : specifications : the EVAP canister and :
: : fuel vapor leaks. The : * Disconnected or : fuel tank. :
: : system failure occurs : cracked fuel EVAP :
: : when no purge flow : canister tube, EVAP :
: : (attributed to fuel : canister purge :
: : vapor blockages or : outlet tube or EVAP :
: : restrictions), a large : return tube :
: : fuel vapor leak or : * EVAP canister purge :
: : multiple fuel vapor : valve stuck closed :
: : leaks are detected by : * Damaged EVAP :
: : the EVAP running loss : canister :
: : monitor test with the : * Damaged or missing :
: : engine running (but : fuel filler cap :
: : not at idle). : * Insufficient fuel :
: : : filler cap :
: : : installation :
: : : * Loose fuel vapor :
: : : hose/tube :
: : : connections to EVAP :
: : : system components :
: : : * Blockages or :
: : : restrictions in :
: : : fuel vapor hoses :
: : : /tubes (items also :

: : : listed under :
: : : disconnections or :
: : : cracks) :
: : : * Fuel vapor control :
: : : valve tube assembly :
: : : or fuel vapor vent :
: : : valve assembly :
: : : blocked :
: : : * Canister vent (CV) :
: : : solenoid stuck open :
: : : * Mechanically :
: : : inoperative fuel :
: : : tank pressure (FTP) :
: : : sensor :

SO DOES MY CAR HAVE THIS PURGE VALVE AND CANISTER?
Where do i look i first?
what are the obvious hoses and fittings that crack? is there one under the thermostat to look at?

thanks for the help.
Also i have a new OEM gas cap so rule this one out.

Dan






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.