The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Throttle body cleaning

The other post is a good way of doing it. I did mine but I took the throttle body out entriely. Here's how.

1. Take of the plastic cover of the throttle body.
2. Disconnect the air pipe with a flathead screwdriver.
3. Disconnect the sensor.
4. There are three bolts that connect the trottle body. They can be removed easily.
5. One end of the throttle body rod is round and is covered by rubbber (or not). Anyway, using a fltahead screwdriver, get as close to the round part, put the screwdriver underneath the rod and pop it up. It should not take too much force to do this.
6. After you have the throttle body off, you can use a throttle body cleaner (make sure the cleaner says it is safe for throttle body and fuel injectors. To clean the brass butterfly plate, use a toothbrush.
7. While you are here, you should replace the liner (a new one from Vovlo costs $3-5.)
8. To put it all back together, follow the directions backwards.

Delgado






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.