The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Hood Latch Broken 850 1997

The grill is held in with 6 or 8 plastic washers. They are rectangular and have a keyhole shaped opening in them. When the grill is installed, the pins on the grill go into the large end of the keyhole and the washer is then slid to the side to lock it in place.

What you'll have to do is with the hood released, reach your fingers under the hood, behind the grill and find these retainers. Push them over to release the pins on the lower edge of the grill and you should then be able to pull the grill out enough to reach the mechanism and free the hood.

These retainers are about 3/4" long by 1/4" wide as I recall. I think the grill is plastic so be carefull not to break it's mounting pins while fumbling with the retainers.

After writing all this I recall that Bay 13 has the procedure. Go to:

http://www.volvospeed.com/Hoodlatch.htm

Good luck,

--
Erwin in Memphis, '95 855t






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.