The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

headlight wiper motor replacement 850

posted by  someone claiming to be ashotwell on  Thu Mar 6 04:50 CST 2003 [RELATED]

Hello Erwin,
There is a gasket between the back of the case and the edge of the case. This has to be compressed to relieve the pressure on the little tabs on the back of the case. I used a gluing clamp. I used a set of small srcewdrivers and pushed each of the tabs in on the back of the housing. With each screwdriver disengaging the tabs, I released the clamp and I was able to pry the back off. Once you are inside, be careful, because the pieces are held in place by the back of the case. It sounds like one of the gears is stripped in your motor assembly. They are plastic, so it would not surprise me. Good luck.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.