The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wiring for side marker lights. 850 1995

posted by  Gerald C on  Thu Apr 3 13:14 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Have you confirmed that your 850 didn't come prewired? (It's easy to peek inside the fender from the opening in the door hinge area.)

If not, which is possible, you can buy a wiring kit from IPD, I believe. The two wires feeding your new side marker light will connect to the two wires on the corner turn lamp. This lamp is easily removed by opening the hood and looking for a small spring clipped around a plastic piece. The lamp assembly is held in place by this spring under tension. Just pull the loop at the end of the spring away from its clipped location and the lamp will completely loosen. Note where the spring was clipped because you will reinstall it the same way. Very easy to do!

Gerald C






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.