The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ABS/STC module S80

I remember reading the post a few weeks ago, someone opening the ABS module with a dremmel and looking inside at the small circuit board with a magnifying glass He found a couple of areas with broken solder. He resoldered those areas, and sealed the box with silicone and his problem was solved. This reminds me of the common failures of the fuel pump and overdrive relays secondary to poor soldering, in the 240/740.

Since you have an extra one, take a chance and open carefully with a dremmel. Buy a good magnifying lamp and check the circuit board solder and resolder or clean those solder points. You have nothing to loose, and about $800 to save.

Please post back on the success or failure of your project.
--
'88 240, '92 740, '98 v70 GLT John in Tampa Bay






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.