The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

850's SRS-sensor , try cleaning the contacts... 850 1993

Many times that SRS light will come on because corrosion on the cable contacts has prevented proper signal information from flowing to the computer. Look under the carpet on the "hump" on the driver's side. The cable coming from the SRS sensor runs under the carpet on the driver's side of the hump and along that hump you'll see a yellow connector. Over the years different things get spilled on the carpet in that area and seep into the connector and allow corrosion to build up. Pull the connector apart and clean the contacts very good, then plug it back together and clear the SRS code from the DLC boxes under the hood (B5 is the SRS terminal) (http://www.volvospeed.com/CheckEngine.htm). See if this fixes your SRS problem before you go out and spend $1k on a new crash sensor. Good luck ....... Mike






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.