The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wiper Arm post 850

posted by  someone claiming to be steve d. on  Tue Nov 25 13:05 CST 2003 [RELATED]

Hi Me,
In the two circles of the picture you will see two ligther looking surfaces, if you look at you car, same place, it will look black like the surrounding blade arm metal. The light surfaces in the picture is were you need to file down the metal, it will be slightly raised on you car. This is the problem with this part. Originaly the two high surfaces keep the blade arm lifted off in the fully extend position. I recently used a eclectric drill and a burr bit ( little tree shaped looking piece)that is for removing metal, to file these surfaces down, and the blade stays in full contact on the glass all the way over.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.