The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Addition of Heated Seats: Can I do it myself? S80

I have been in contact with a fine gentleman by the name of Rich Kelley, who has supplied me with a parts list for the installation of heated seats in a 2000 S80 T6 that came without them. It is as follows:

9168282 Push button seat heater left $6.84
9442462 Push button seat heater right $10.69
8686606 Back heater grid, you would need two $65.83
8619430 Bottom heater grid, you would need two $56.24
9442947 Control module for heating grids you need two $116.40
9194292 wiring harness, you need two $15.21
8651378 Software down load application $25.00

He went on to say that his shop would require eight hours of labor for installation. Although the price for the parts seems reasonable, $720 just for the installation puts it far out of my reach. I was wondering if it would be possible to do this installation myself. I am assuming that the removal/disassembly/reassembly of the seats would be the most formidable task. I am also aware that I would have to have a Volvo Dealership perform the software installation.

Would any of you guys have the instructions on hand for what I would need to do to install this? I know that for the first two parts, I would simply pry out the plug on the ECC and insert the buttons. I would also need to put a fuse in the fuse cluster in the appropriate place.

Therefore, I need instructions on removing and disassembling the seats for the installation of the heater grids and the control module, and instructions on installing these parts properly. I also need help with where the wiring harnesses go.

If you guys would be kind enough to provide me with instructions as listed above, I would be most greatful. I would like to do a partial disassembly of the seats to make sure it is within my ability, and scope out where everything goes before I order $500 worth of parts.

One final question: would I be able to just purchase half of the parts, and do one seat only? Or would this confuse the software and cause problems? This car is under warranty and I don't want to do anything that could jeporadize that.

Thank you very much. I appreciate your time and consideration.

Scott






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.