The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to remove the steering wheel front cower? 850

posted by  Gerald C on  Fri Dec 19 10:16 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

There are two screws on the back of the wheel. You will need a long (4-5") Torx-30 bit to get to them. Since you will be working with a loose airbag connector, it is recommended that you disconnect the battery first. Turn the wheel 90-deg to the left to access the first screw opening, then 180-deg right to get to the second one. This will loosen the air bag, but be careful since its wire is still connected. You can remove the wire from the back of the bag, but don't turn the ignition on with the battery connected until all is back in place; otherwise, you will set an SRS fault code. The two airbag screws are replaced in reverse order (per the caution sticker inside).

Gerald C






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.