The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Upper torque bushing. 850 1996

posted by  the kick inside on  Sun Apr 4 12:41 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu May 17 09:58 CST 2007
[RELATED]

gear puller (about $15) , a large washer that will sit in the bushing, but not over the metal rim...a socket & driver...just wind the sucker out!..takes about 5 mins and two sets of hands (preferably) - one set to hold the puller in place...one to wind...also can be used to pop back in (but more difficult)..for back in two circles of wood 3/4 thick and holes through them off set to match the bushing, 10mm rod bolt down the midle, two large washers on the outside of each piece of wood and two nuts ... wind the sucker in...

i found some grease helped on the back in...

buy a gear puller that can be 2 arm or 3 arm (sort of like a construction set)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.