The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

CODE 1-2-2 ON THE B2 SIDE....CAN'T CLEAR 850 1995

posted by  VOBD on  Sun May 23 05:14 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

B2 = Cruise control (Also pin 13 in OBDII connector 96>)

Note, cruise control codes are reset (except 1-2-2) when you turn off the ignition. You will never clear code 1-2-2.

Code 1-2-2 = Vehicle speed has not exceeded 22mph for 15 seconds or no speed signal.

So to see which of the possibilities it is you need to run the car above 22 mph for more than 15 seconds and read the codes without switching off the ignition.

The cruise control ECU is in the panel for relays under dash drivers side.

The usual cause of failure is that the brake pedal switch has come loose from it's mounting.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.