The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Heater hoses 850

I purchased replacement hoses and a retainer kit from Europartsdirect for this job. I didn't put them in yet but have them as a spare in the car for long trips. The retainer kit has an assembly sketch in it. According to the sketch, each hose gets 3 rings on it and then the last item is the yellow retainer (4 items per hose in all). The retainer has barbs on it which should snap in to hold the whole assembly in place. You would push it all in to install, and squeeze the retainer to release. In the lower hose is one additional washer that you remove once the hose is out and then reuse with the new hose. From the look of it I would think the yellow retainers hold very tight and would have to be squeezed with some force to free them. Based on my experience with cooling system hoses in other cars the various rings might not survive removal so you would probably need the kit if you didn't already get it with the hose(s).






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.