The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

wood trim removal to replace console gear light S70

ingstprt,

WHOA!

Unless your car is for the European market, you:

1. Remove the two fasteners under the access panel.
2. Remove the handbrake cover by pressing down slightly and sliding it to the left. Then slide the boot over the handle to remove completely.
3, Disconnect the two harness connectors found underneath.
4. Pull the sides of the console away at their lower front edges ( where they overlap the center stack section) to release the clips.
5. Move the gear selector to the middle position and lift the console up and out of the car.

If for the European market, you may have two fasteners holding the front in. You can remove the coin holder by pulling it up in back and look to see. Most likely though the console has a tab that slides into a slot in the front w/o additional fasteners.

You DO NOT have to remove the wood trim to remove the console.

Let me know if you need further info.

Bryan






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.