The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

You don't need the $pecial tool S40-V40

I changed all my pads recently. No special tools required.

Go to your local hardware store if you do not have (or borrow) a 6in C-clamp. The head of a C-clamp rotates so it does the same thing as the special tool plus you can clamp things when you need it.

The rear calipers do rotate as they are pushed in. With a 6in C-clamp I pushed my rear calipers back easily. Just put the C-clamp in place with the rotating head over the caliper piston. Tighten. If the piston does not move easily the first turn, back off a half a turn and tighten again. The piston will move freely.

BTW: My recommendation is to get the Mintex pads from FCP Groton. No dust, last longer than stock, stopping power excellent like stock, and at $30 front set $25 rear you can't go wrong.

mormit
--
85 245DL 255,000mi V15cam 'Old and Rusted', 02 S40 'New Hotness'






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.