The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1996 850T O2 sensor replacement 850 1996

posted by  someone claiming to be bl on  Sat Dec 18 19:04 CST 2004 [RELATED]

A "direct fit" sensor will have the four wire wiring harness with connector attached. A "universal fit" sensor will have just four wires that you need to splice to the existing wire with a splice kit. Make sure you get the correct one by comparing the #. SOme vendors have the wrong number sensor listed for the 850. This caused me a lot of grief (and $$) DOn't drop it during installation or get any of the antiseize paste on the tip as this will ruin it. Is a straight forward job unless the old sensor is seized in the pipe. If so, soak it with a lot of PB Blaster and it should come out. Good luck

bl






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.