The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Tracs / ABS Lamps On

OK, so for the first time ever in the 11years of owning my car, the Tracs / ABS Lamps came on as should at start up, unfortunately they didn't go off. No problem I figure, must be a code recorded. Sure enough I read the code and proceeded to erase it. The Lamps are still remaining on, that is the problem. If I recall, after reading codes at least twice, you simply hold the button down for approx 8 seconds and wait for the led to come on and stay on (it did), then you hold the button again for approx 8 seconds, then when released the led should go off (it did). The codes should now be erased, right? The lamps are remaining on. I am assuming you use the same diagnostic port (A3 ABS) for erasing the codes?
What am I missing? Erasing and resetting lamps have never been an issue before.
TIA
--
'82 240DL Stock / Masters Class, '94 850 GLT Fully Loaded / Daily Driver, CVC / VCOA Member http://www.capcan.com/tonyg.htm






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.