The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Evaporator connection 850

posted by  someone claiming to be fixit2003 on  Tue Jul 19 16:24 CST 2005 [RELATED]

The lines are held together by a cicular spring. You need to got to an auto parts store and explain what you're doing and they'll be able to sell you a set of spring expanders for around $30. There's a multi size tool also available that's alot cheeper but you don't have much room to work with and I think the individual rings are better. They're a little tricky to use. You have to select the correct size and press it into the fitting so that the spring is expanded enough to pull out the flared tubing. You have to push the tool in and hold it and at the same time pull the two pieces of tubing apart. Good luck.... They go back together alot easier. Be sure to replace the o-rings.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.