It takes work to get air in the lines. You would have had to loosen the brake line at the caliper or the bleeder nipple. I doubt that you did either.
To remove air from the lines, you will need a can of DOT4 brake fluid and a pump or helper to pump the brakes. The manual system requires a bit of finese because the fluid reservoir can not be allowed to get low.
Take a look at the 700/900 FAQs to learn how to bleed the brake lines.
You did use brake grease on the slide pins after you cleaned them, right?
Klaus
--
I still miss my 164 and my 854T. Just driving a V70R :)
|