Volvo AWD S70 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2004 S70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

vacuum lines? S70

posted by  KlausC on  Sun Mar 8 06:10 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

Use some penetrating oil on the Torx screws that hold the plastic cover on. Let it soak for a long time, and then addd some more. Use a good quality Torx driver so you don't strip any of the screws.

If you have been driving through that much water, it is possible that you got water in the spark plug holes and that is causing the misfire. If so, you will need to wick the water out of each hole, before taking out a spark plug. Don't let an inch of water pour into the cylinder!

The throttle body is on the driver's side of the intake manifold where the air hose connects.
--
My name is Klaus and I am a Volvoholic.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New vacuum lines? [S70]
posted by  someone claiming to be SUPERBAD  on Sat Mar 7 08:38 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.