Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2005 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

How to get the valve cover off 850 1996

posted by  KlausC on  Tue Mar 16 11:31 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

You got it! Yankee ingenuity to the rescue.

That has got to be the dirtiest cam I have ever seen. I think I would have just added a can of AutoRx and driven for a while. You might still want to try it, the rest of the engine will also be that full of gunk!

Be very careful getting the head bolts out, they have a tendancy to get stuck and break off. Loosen each bolt 1/16 of a turn before you take any out, it might help. A stubborn bolt needs PB Blaster and possibly tightened a hair before loosening.

Once the head is off, it will need to be cleaned. Check the valve seals for leaks. Buy a seedling plant tray with at least 20 slots if you remove any valves, makes replacing back into the same position much easier. 20 of those little buggers.

Motor oil and beer, sounds like a fun break. Much better than my daughter, she slept for a week :)

Klaus
--
Praying for Cynthia Amendt, heaven bound






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 850 Modular White Block Camshaft Cover Removal Technique [850][1996]
posted by  Goatman  on Mon Mar 15 17:40 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.