You will need a funnel made for the tranny dipstick hole, it is extra long and narrow and can be found at your local autoparts store. The dipstick hole is the ONLY place you can add ATF.

For easier access, remove the air intake tube that goes from the top of the radiator to the air filter box. Pull it off the box first, pull it towards the engine and forward a little, then pull it out of the engine bay.

A little caution, the ATF will flow through the funnel very slowly, so patience is needed.

If you are going to remove the drain plug, make sure you have a new aluminum crush washer. It is the same size as the engine oil drain plug.

Klaus
--
Always willing to listen, just not able to take direction.