Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2013 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

I would like to replace that rear hanger now. Is corroded . Part#? 850 1995

posted by  KlausC on  Fri Dec 11 09:56 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

The rear hanger, behind the muffler, is not what normally fails. The tail pipe has two metal arms back there that hook into the rubber donuts, usually the arms rust off and the tail pipe sags. There are replacement "arms" that can be bought after market and clamped on to the tail pipe.

When I replaced the muffler on a 1994 850T, I had to replace the rear hanger that is bolted to the body because the hanger design was changed in later years including the "arms" location on the exhaust pipe.
--
Keeping it running is better than buying new






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New In 2009 volvo welded up my exhaust when replacing Muffler [850][1995]
posted by  Three5bangers  on Wed Dec 9 09:05 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.