Volvo AWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2003

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

changing a 2002 S40 timing belt update

posted by  Volvo From Heck on  Sun Jan 21 12:19 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 20:56 CST 2014
[RELATED]

For those who followed and/or contributed to my question regarding the vertical studs in the intermediate cast bracket between the upper right side motor mount and the head being in the way of removing one of the bolts holding that bracket on. I was only able to get to working on it this week.
The solution was staring me in the face. The studs stand more than an inch above the installed nut for the motor mount. Nothing a cut-off wheel couldn't handle and with 1/2 inch removed from the stud I could get a proper 1/2 inch drive socket on the bolt head and crack it loose with a breaker bar--no need for any unobtainable 6 point offset wrench. Now I can properly mourn the loss of my broken S-K 13mm 6 point combo wrench :-( -- Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New changing the timing belt on a 2002 S40
posted by  Volvo From Heck subscriber  on Mon Dec 4 09:48 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.