Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

engine stall / no start / codes available 850 1993

Hello Tony,
thanks a bunch for your help.
I drove the car again yesterday after clearing all codes. It died again, code was 3-1-4 camshaft position sensor. Cleared the codes and tried to fire it up, cranks fine but no start. Again code 3-1-4 is set.
According to my Volvo dealer's parts guy these sensors fail quite commonly.
So I ordered the new sensor and will get it on friday.
My first guess was the RPM sensor also (I had these go bad on other cars), but now it seems that the camshaft sensor is more likeley the cause.
If the failure condition persists the next part to be replaced will be the crank sensor!

With best regards
Stefan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New engine stall / no start / codes available [850][1993]
posted by  someone claiming to be Stefan Knappe  on Tue Jan 15 18:36 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.