Be very paitine....

there many bolts underneat that you can not see...

you also need a swvile socket so you can rotate around...

you also need to remove the throatle body .. that you will need to buy a new gasket...

may be you can reused ...


first time give yourself 5 hours... after that next time it is a cake walk...

Be very careful when you discontted the shiftling linking ..it look like too cup at both end.. try to remenber the position that the cup seat .. if not when you but it back.. when you step on the gas the thing will just fall off that mean you can not increase the RPM...

have a beer have fun.. easy not that hard...

you can reused your old injector 0-ing by clean them up than apply some vasiline into the ring it work just fine.. this work for dealer and work for me....

hope this input heplllll