Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2012 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Motor Mount Replacement 850 1995

posted by  Erwin on  Mon May 6 07:00 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:39 CST 2014
[RELATED]

The offset hole in the IPD bushing is intentional. As I recall, there are a couple of arrows (>>) on each piece adjacent to the hole and should be oriented so that the hole is nearest the firewall. If I read you right, yours if rotated 180 out. Also check the condition of bushing at the firewall.

I haven't replaced my engine mounts (yet?) but think a floor jack under the engine (put a board or suitable peice of thick plywood between the jack and engine) might work. I think they're all replaceable with the engine in place.
--
Erwin in Memphis, '95 855t - fast & comfy, '86 Guzzi LeMans - fast & loud, '76 Montesa 348 Cota - slow.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Motor Mount Replacement [850][1995]
posted by  bjinSeattle  on Sun May 5 12:03 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.