|
I have removed my radio several times. Not sure about replacing the light but this is how you remove the panel.
1. Remove the housing around the gear shift. Best to put the key in the ignition and put the gear shift in 3rd.
2. remove the rubber from under the panel. There are two screws there that you must use the star driver that came in your tool kit.
3. Once the screws are removed just takes a little tender loving care and some pulling and it comes right out.
4. To remove the radio just take out the two screws behind the panel and it come right out. Same star driver.
***5. Each time that I have removed the panel my SRS warning light has come on and I have to take it to the dealer to get reset. Only happens when I unplug the wires.
|