Hi,

I am mainly looking for information on the two rectangular connectors, although information on the two single-wire connectors may be helpful as well. I already have the pin-out for the amp connector, and my radio unit appears to operate the CD-change OK so I am not too concerned with that din connector at this point.

The problem with my radio is that when I first turn it on, it outputs sound for a short period of time (maybe around a minute), then the volume fades to the left speaker(s) and then goes completely silent. Powering the radio off and back on at that point does not get the volume back. It appears that I have to turn off the car completely, turn the car back on, power the radio back on in order to get the volume back, then the whole volume/sound problem repeats again. Also, the in-dash CD unit is no longer working, I can't get it to take in a CD; I have already tried the method of pushing the little switch inside the head unit and that didn't help.

If anyone has suggestions on things to try and check, I would very much welcome the information.

Thank you.

Chie